Press fitting fittings/connectors

Press fitting fittings/connectors

You can find all of our stainless steel press fitting fittings/connectors range in this section.
Press fitting is a controlled cold-working deformation process which allows you to quickly assemble parts without needing any specific qualifications.
To avoid bending operations, Béné Inox proposes stainless steel elbows for press fitting for your installations with different curve radii with the following angles: 90°, 45°, 60°, 30° and 15°.

Find out more about adjustable nuts with smooth or grooved ends , which can make it easier for you to position your accessories on your pipes.
You should choose your gasket material according to the transported fluid temperature and your process:
- EPDM for water treatment and temperatures between -20°C and +120°C
- FKM for e.g. solar heating installations with temperatures between -20°C and +120°C
- NBR for e.g. oils with temperatures between -20°C and +95°C

Our pipes for press fitting
are made from non-quenched 304L stainless steel and quenched 316L stainless steel which is more adapted to bending operations. [ Read more ]

To find out more :
>> Please read our product information about our press fitting fittings/connectors, piping and tooling range
>> Watch our video about press fitting
Retour en haut